Custom Wooden Combs with Bespoke Shapes and Finishes
Develop the species, tooth geometry, finished surface, engraving and protective pack as one wooden comb specification.
- Material: Beech, sandalwood, peach wood, boxwood, walnut, maple or another confirmed species
- Size: 90–230 mm or custom dimensions
- Color: Natural grain, stained tones or approved coatings
- Logo: Laser engraving or branded packaging
- Packaging: Sleeves, pouches, paper boxes or gift boxes
Wooden comb projects can start at 50 pcs. Typical timing is about 15 days for a sample and about 28 days for production after sample approval; species, finish, branding, packaging and quantity can affect the confirmed schedule.
Send a Wooden Comb Brief
Choose the Wood Before Finalising the Teeth
Species, moisture condition and natural grain variation influence how a wooden blank can be shaped and finished. Confirm them before locking the tooth geometry, surface treatment or engraving.
Decisions That Define a Wooden Comb
Use these three approvals to turn a wood reference into a repeatable product brief.
Species & Accepted Variation
Tooth Geometry & Edge Finish
Surface, Engraving & Pack
Set an Approval Range for Natural Wood
A species name alone does not define the appearance of every finished comb.
- Beech & boxwood
Review these lighter species when an even-looking base and detailed shaping are priorities. - Walnut & sandalwood
Review darker natural tones with the understanding that grain and color will vary. - Approval range
Record the species, moisture condition, acceptable grain and tone range, finish reference and any required sourcing documents.
Draw the Tooth Geometry, Not Only the Outline
Typical comb length is 90–230 mm, or a custom profile can be reviewed from a dimensioned drawing.
- Overall form
Mark length, width, thickness, handle shape and edge profile. - Tooth zone
Define tooth spacing, tooth length, fine or wide zones and the required tip shape. - Sample check
Compare dimensions, tooth spacing, straightness, burrs and tip smoothness with the approved reference.
Approve the Finished Surface on a Physical Sample
The same finish can look different across wood species and grain patterns.
- Natural surface
Accept an agreed range rather than expecting every piece to reproduce one photograph. - Stain or coating
Supply a physical tone reference and confirm the selected surface treatment for the project. - Viewing reference
Review the finished sample under consistent lighting before using it as the production reference.
Plan Engraving Around Grain and Finish
Logo legibility depends on the wood, engraving size, placement and finished surface.
- Engraving position
Choose a clear area and approve the mark on the selected species and finish. - Pack branding
Move detailed artwork to a sleeve, pouch or box when the comb surface is too limited. - Artwork control
Supply vector artwork with final dimensions, position and color details for any printed pack.
Protect Teeth and Finished Surfaces in the Pack
Packaging should be evaluated against the finished comb, not selected from artwork alone.
- Sleeve or pouch
Check contact points around the tooth tips, edges and engraved face. - Paper or gift box
Confirm internal fit, inserts and the position of private-label artwork. - Carton details
Record unit count, barcode, shipping marks and destination with the approved pack reference.
Compare Material and Carry Formats
Use these related pages when the brief is still deciding between natural materials or compact formats.
From Approved Wood to Packed Comb
Compare wood and bamboo, review laser engraving limits, and use the project process to plan the sample and production references.
Send Your Wood and Finish Reference
Share the intended use, species, dimensioned drawing, acceptable grain and tone range, surface reference, quantity, engraving artwork and pack direction.
Review My Wooden Comb BriefWooden Comb Questions to Settle Before Sampling
Resolve these material-specific points before treating one sample as the production reference.