Custom Fine-Tooth Combs with Precise Tooth Spacing
Develop fine or mixed tooth zones around measurable pitch, tooth thickness and length, straightness, smooth edges, compact or professional dimensions, logo clearance and unit protection.
- Material: Plastic, POM, cellulose acetate, wood or bamboo by application
- Size: Compact or professional formats with fine or mixed tooth zones
- Color: Natural, solid, transparent or patterned options
- Logo: Printing, engraving or molded-in branding
- Packaging: Sleeves, pouches, cards, cases or boxes
Orders can start at 50 pcs. Typical timing is about 15 days for sampling and about 28 days for production after sample approval; material, tooth detail, tooling, branding, packaging and quantity can affect the confirmed schedule.
Send a Fine-Tooth Drawing
Start with Pitch, Straightness and the Intended Finish
Fine teeth leave less room for unclear dimensions or unfinished edges. Define the tooth zone and its intended grooming or finishing use before choosing the compact body, material and brand treatment.
Three Points That Decide Fine-Tooth Accuracy
Review them on the same drawing and physical sample.
Pitch & Mixed Zones
Tooth Profile & Tip Shape
Straightness & Edge Condition
Choose Material for the Required Tooth Detail
Material and forming route affect how fine features, straightness and surface finish should be reviewed.
- POM & selected plastics
Review the resin, tooling and molded sample together when close tooth spacing and controlled dimensions are required. - Acetate, wood & bamboo
Review cut or shaped teeth with the relevant sheet, grain, thickness and polishing limits. - Selection reference
Record the intended use, pitch, tooth profile, preferred flex, finish and any documents that must be confirmed.
Put Tooth Pitch and Tolerances on the Drawing
Typical overall length is 90–230 mm, but a fine-tooth brief also needs measurable detail inside the tooth zone.
- Body callouts
Mark overall length, width, thickness, handle or spine profile and any compact-carry limits. - Tooth callouts
Record pitch or clear gap, thickness, length, taper, tip shape and mixed-zone transitions. - Approval measurements
Check dimensions, straightness, alignment, tooth spacing and agreed tolerances on the sample.
Inspect the Surface Between Close Teeth
Color approval does not replace checking the narrow edges and spaces created by the fine-tooth layout.
- Solid or transparent material
Review molded color and surface texture on the selected plastic. - Natural or patterned material
Review grain or acetate pattern together with the polished tooth zone. - Close-tooth inspection
Check color, edge finish, tip smoothness and burr condition on the physical sample under consistent lighting.
Reserve Logo Space Away from Fine Features
A compact comb may have limited branding area once tooth roots, edges and grip zones are protected.
- Printing
Use a suitable flat plastic area and confirm print size, color and position on the sample. - Engraving
Review it only on a compatible wood, bamboo or acetate surface with enough clearance. - Artwork placement
Supply vector files at final size and mark their distance from tooth roots, outer edges and any grip area.
Protect Fine Teeth from Pack Pressure
The unit pack should hold the body without forcing the close tooth zone against tight inserts or attachment points.
- Sleeve or pouch
Check insertion, removal, tooth clearance and the orientation of the comb. - Retail card or box
Confirm holding points, inserts, instructions, artwork area and barcode position. - Carton record
Save unit protection, count, carton quantity, orientation, marks and destination.
Compare Fine-Tooth and Sectioning Tools
Use these pages to separate tooth-density requirements from tail, cutting, pocket and sheet-material decisions.
Form the Fine Teeth, Then Measure the Result
Define pitch with the tooth-spacing guide, record critical measurements through custom shapes and sizes, and review the project process.
Send the Pitch and Mixed-Zone Drawing
Share the intended use, body dimensions, pitch or clear gap, tooth profile, mixed-zone layout, material preference, quantity, logo artwork, unit pack and destination.
Review My Fine-Tooth BriefFine-Tooth Comb Questions for Tolerance Review
Answer these before close tooth spacing is approved for production.